ElectrIQ AIRCUBE Manual de usuario descargar pdf (Pagina 5)

Page 5 of 13

INSTALLATION

Warning：

：：

：Before using this unit, please keep it upright for at least 3-4 hours.

This unit can easily be moved from one room to another.

While moving the unit please note that it must always be kept upright and then placed on an

even surface.

Unpacking

Open the box and remove all the packing out of way

Grip the unit by the carry handles located on either sides of the unit and

carefully lift until it slides out of the foam base

Lift and lean the unit slightly to take out exhaust hose from under the unit

as in the picture attached

Install the exhaust hose on the unit before operating the unit

CONTENTS

1 / Air conditioner unit 2 / Remote control

3 / Side hose mount 4 / Hose and window kit

Assemble the hose

1. Clip the hose connector to

side of the unit

2. Insert the hose and rotate is

firmly into adapter

3. To remove the hose reverse

the procedure

Note: To Install the hose for

heat mode please remove

the hose and clip as in figure

C① and reversing it to the

other side of the unit using the

adapter provided. Assamble the adapter on the panel facing the grills as in figure (B).

After insertion of the adapter the procedure is the same as in figure (A).

In heat mode

the unit will look as in figure C②

②②

②.

C: ①

hose+clip / adapter

②

1 2 3 4 5 6 7 8 9 10 11 12 13

Sin comentarios

ElectrIQ AIRCUBE Manual de usuario Pagina 5