ElectrIQ AIRFLEX 15 Manual de usuario descargar pdf (Pagina 5)

Page 5 of 17

INSTALLATION

Warning：

：：

：Before using this unit, please keep it upright for at least 3-4 hours.

This unit can easily be moved from one room to another.

While moving the unit please note that it must always be kept upright and then placed on an

even surface.

Unpacking

Open the box and remove all the packing out of way

Grip the unit by the carry handles located on either sides of the unit and

carefully lift until it slides out of the foam base

Remove the air outlet and take out the exhaust hose as in the picture.

Install the exhaust hose on the unit before operating the unit

CONTENTS

1 / Air conditioner unit 2 / Remote control

3 / Side hose mount 4 / Hose and window kit

Assemble the hose

1. Clip the hose connectors to sides of the unit (after

removing the hose from storage)

2. Insert the hose and rotate is firmly into adapter

3. To remove the hose reverse the procedure

Note: To install the hose for heat mode please remove

the hose and clip as in figure 01 and reversing it to the

other side of the unit using the adapter (fig. 02) provided.

Reverse the process to but the unit back in cold mode.

In heat mode the unit will look as in figure 03.

hose+clip / adapter

1 2 3 4 5 6 7 8 9 10 ... 16 17

Sin comentarios

ElectrIQ AIRFLEX 15 Manual de usuario Pagina 5